AKT Motoren ist ein professioneller Lieferant, der Mikro-Elektromotoren und Motoren drive bietet.

Home > Produkte > Motoren Drive

     H Series, High Current and Variable Parameter Settings, 2 Quadrant Brushless DC Motor Driver

    PLC interface, amazing 200A super high current with low voltage and incredible small dimension brushless DC motor driver for industrial robot, textile machine, PCB board cutting machine and others. We present industrial chips to meet industrial application temperature requirements. Optoelectronic isolation for analog voltage / PWM pulse / pulse frequency signal and other security interfaces. Super reliable design with safe foreward and reverse, safe start, anti-interference, over temperature / over current / short circuit / under voltage / over voltage and other protections.

    1. Weitere Informationen
    2. Zeichnungen
    3. Kundenspezifische

    Defination of Part number:

    BLSD
    24
    35
    WDC
    2Q
    H
    F
    P
    T
    BLDC drive
    Rated Voltage
    Peak current limit
    DC input ①
    Control mode
    Parameter ②
    PG type ③
    Speed regulation type ④
    Temp ⑤

    ① :  This code shows the DC Power input type of the drive: WDC = Wide range DC input; LDC = Ultra low voltage DC input; DC = Normal DC input; AC = AC input; ADC = AC and DC dual purpose.
    ② : This code shows the parameter type of the drive: H = High current; N = Variable parameter; S = Simple fixed parameter; SH = Small type high voltage; HV = High voltage. 
    ③ : This code shows the PG type: F = PG  1x hall sensor signal/phase, None= 6 x hall sensor signal/phase.
    : This code shows the speed regulation type: P = 0-3KHz speed regulation, None = voltage command.
    This code shows the temperature range of the drive: T = -40 ~ +65 ℃ , None = -10 ~ +45℃ .
    Note: In order let the part number easier to read, Some part number code will not be shown in the specification table, a code "X" will be instead. The full part number will be provided in the quotation or the proforam invoice..

    Specification:

    ModelTemperature
    range
    (ºC)
    Voltage
    range
    (VDC)
    I-pk
    (A)
    I-con
    (A)
    60º/120º
    Hall
    sensor
    PWM
    f(kHz)
    PI
    Close
    loop
    of speed
    SV
    Ramp
    time
    (S)
    SV
    Range
    (V)
    LV
    /OV
    AlmPGPI
    Close
    loop
    of current
    Parameter
    Settings
    By Switch
    And Pot
    SC
    /OT
    Safe
    F/R
    Safe
    Start
    Heat
    Sink
    BLSD2435DC-2Q-H-X -10~+45
    -40~+65
    17~32 17.5~35 8.75~17.5 15 0.1~10 0~5 24p@8-pole
    BLSD2450DC-2Q-H-X-10~+45
    -40~+65
    17~32 25~50 12.5~25 15 0.1~10 0~5 24p@8-pole
    BLSD2475DC-2Q-H-X-10~+45
    -40~+65
    17~32 37.5~75 18.75~37.5 15 0.1~10 0~5 24p@8-pole
    BLSD24100DC-2Q-H-X-10~+45
    -40~+65
    17~32 50~100 25~50 15 0.1~10 0~5 24p@8-pole
    BLSD24150DC-2Q-H-X-10~+45
    -40~+65
    17~3215075150.1~100~524p@8-pole
    BLSD24200DC-2Q-H-X-10~+45
    -40~+65
    17~32200100150.1~100~524p@8-pole
    BLSD3635DC-2Q-H-X-10~+45
    -40~+65
    27~45 17.5~35 8.75~17.5 15 0.1~10 0~5 24p@8-pole
    BLSD3650DC-2Q-H-X-10~+45
    -40~+65
    27~45 25~50 12.5~25 15 0.1~10 0~5 24p@8-pole
    BLSD3675DC-2Q-H-X-10~+45
    -40~+65
    27~45 37.5~75 18.75~37.5 15 0.1~10 0~5 24p@8-pole
    BLSD36100DC-2Q-H-X-10~+45
    -40~+65
    27~45 50~100 25~50 15 0.1~10 0~5 24p@8-pole
    BLSD36150DC-2Q-H-X-10~+45
    -40~+65
    27~4515075150.1~100~524p@8-pole
    BLSD36200DC-2Q-H-X-10~+45
    -40~+65
    27~45200100150.1~100~524p@8-pole
    BLSD4835DC-2Q-H-X-10~+45
    -40~+65
    37~56 17.5~35 8.75~17.5 15 0.1~10 0~5 24p@8-pole
    BLSD4850DC-2Q-H-X-10~+45
    -40~+65
    37~56 25~50 12.5~25 15 0.1~10 0~5 24p@8-pole
    BLSD4875DC-2Q-H-X-10~+45
    -40~+65
    37~56 37.5~75 18.75~37.5 15 0.1~10 0~5 24p@8-pole
    BLSD48100DC-2Q-H-X-10~+45
    -40~+65
    37~56 50~100 25~50 15 0.1~10 0~5 24p@8-pole
    BLSD48150DC-2Q-H-X-10~+45
    -40~+65
    37~56150
    75150.1~100~524p@8-pole
    BLSD48200DC-2Q-H-X-10~+45
    -40~+65
    37~56200100150.1~100~524p@8-pole

    BLSD1235LDC-2Q-H-X
    (Ultra Low Voltage)

    -10~+45
    -40~+65
    5~18 17.5~35 8.75~17.5 15 0.1~10 0~5 24p@8-pole

    BLSD1250LDC-2Q-H-X
    (Ultra Low Voltage)

    -10~+45
    -40~+65
    5~18 25~50 12.5~25 15 0.1~10 0~5 24p@8-pole

    BLSD1275LDC-2Q-H-X
    (Ultra Low Voltage)

    -10~+45
    -40~+65
    5~18 37.5~75 18.75~37.5 15 0.1~10 0~5 24p@8-pole

    BLSD12100LDC-2Q-H-X
    (Ultra Low Voltage)

    -10~+45
    -40~+65
    5~18 50~100 25~50 15 0.1~10 0~5 24p@8-pole
    BLSD12150LDC-2Q-H-X
    (Ultra Low Voltage)
    -10~+45
    -40~+65
    5~1815075150.1~100~524p@8-pole
    BLSD12200LDC-2Q-H-X
    (Ultra Low Voltage)
    -10~+45
    -40~+65
    5~18200100150.1~100~524p@8-pole

    BLSD4835WDC-2Q-H-X
    (Ultra Wide Voltage)

    -10~+45
    -40~+65
    17~56 17.5~35 8.75~17.5 15 0.1~10 0~5 24p@8-pole

    BLSD4850WDC-2Q-H-X
    (Ultra Wide Voltage)

    -10~+45
    -40~+65
    17~56 25~50 12.5~25 15 0.1~10 0~5 24p@8-pole

    BLSD4875WDC-2Q-H-X
    (Ultra Wide Voltage)

    -10~+45
    -40~+65
    17~56 37.5~75 18.75~37.5 15 0.1~10 0~5 24p@8-pole

    BLSD48100WDC-2Q-H-X
    (Ultra Wide Voltage)

    -10~+45
    -40~+65
    17~56 50~100 25~50 15 0.1~10 0~5 24p@8-pole
    BLSD48150WDC-2Q-H-X
    (Ultra Wide Voltage)
    -10~+45
    -40~+65
    17~5615075150~50~524p@8-pole
    BLSD48200WDC-2Q-H-X
    (UltraWide Voltage)
    -10~+45
    -40~+65
    17~56200200150~50~524p@8-pole

    Technical Note:

    1.Control signals:
    F/R-----H or Open=Forward, L or Close=Reverse
    EN------H or Open=Disable, L or Close=Enable
    BK------H or Open=Running, L or Close=Brake
    SV------0~5V speed reference(112K input resistance)
    PG-----Speed pulse output(OC)
    ALM---Alarm output(OC)

    2. Signal wire:
    Control signal cable and hall sensors cable can not be tied together with windings cable, otherwise, it will take interference. The long wire should be shielded wire.

    3. Alarm conditions:
    a. Hall sensor signals are not correct.
    b. LV or OV for 1~3S.
    c. Short circuit and Over temperature of case (80℃)..
    d. Over load for 5~6s continuously.
    e. It can be reset by Turn-Off-On DC Power or Disable the driver once.

    4. LED indicator:
    SC--------Bright=Short circuit , Dark=driver is OK
    P/A-------Bright=Driver is OK, Blink=Driver is in alarm
    SHAFT----Bright=Motor shaft is moving, Dark=Motor shaft is in static

    5. Braking operation:
    The motor speed must be less than the safe brake speed Ns when you brake the motor.
    For Y windings, Ns=√3 x Ip x RL x N/ (2x Vp)
    For △windings, Ns=IP x RL x N/ (2 x √3 x Vp) 
    Ip=Peak current(A), RL=Line to line resistance of windings(Ohm)
    N=No-load speed(rpm), Vp=Rated voltage(V), Ns=Safe brake speed(rpm)

    6. Safe F/R:
    If you change F/R of the driver rapidly, it will stop the power stage and motor will be free until the speed is detected as zero,and then to drive in correct direction. This means smooth reverse.

    7. Safe start:
    If the motor speed is not detected as zero at power on, the driver will be free until the motor speed is zero.

    8. Driver setup by pot and switch:
    R-SV pot=SV voltage ratio, R-LG pot=Loop gain, R-PC=Peak current ratio, R-RT pot=Ramp time
    SW1=60/120 Hall sensors, SW2=Open/Close loop, SW3,4=Speed/Current loop, SW5=Loop filter time, SW6=SV ramp time setting, SW7,8,9,10=Speed range setting.

    9. Peak current selection:
    Ip>=2xIr or Ip>=4xPo/Vp, Ip is peak current of driver(A), Ir is rated current of motor(A)
    Po is rated output power of motor(W), Vp is rated voltage of driver(V)

    blsd-var-high.jpg

    Outline Drawing:

    AKT Motor




    AKT Motor




    outline3.jpg


    Kundenspezifische:

    heatsink.jpgmotor.jpglogo.jpg
    KühlkörperMotoren tuningLogo / Marke



    1. Kühlkörper: Nach Kundenwusch werden die Produkte mit Kühlkörper und ohne Kühlkörper geboten, um verschiedene Bedienungsfelder anzupassen.
    2. E-Motoren Tunning: E-Motoren werden von Anwendungsbereich der Kunden geregelt
    3. Logo und Marke: Nach Kundenwunsch werden Körper der Laufwerke mit Logo und Marke gedruckt.

    Interested in this product? Get in touch with us. (quotation, catalogue, technical support, etc...)

    Name
    Email
    Phone
    Interested product
    The message content
    Code
    Changer